SmartgridOne logo
SmartgridOne logo
Accessories
AppCertificates
Configuration from A to Z
1. Link to your account2. Accessing commissioning interface3. Grid limits4. Location / address5. Add grid energy meter6. Add other devices7. Grouping devices
8 Local Control Modes
9. PV panel configuration10. External control signals
11 Extra Information
Adding a deviceAdmin password and two-factor authenticationAdvanced settingsBackupBattery maintenance chargeConfiguring a fixed IP address in WindowsData usageDC-Linking Inverters and BatteriesDevice settingsDirect relay or switch controlEmail alarmsEnergy CostsEnergy storage and EVsFactory resetMaster/slave invertersNetwork settingsPhase imbalance correctionPredictionsPrioritiesReboot and automatic rebootRescale energy meter readingsReverse energy meter readingsSavings EstimatesSettings page overviewSoftware updatesTesting and manual overrideUser management
Control response timeController
Customer Specific
Devices
External Signals
InstallationLicenseNetworkQuick StartSafety, maintenance and legal noticesSpecificationsStatus LEDs
Toolbox
Troubleshooting
Video tutorialsWiring & connectivity guidelines
Configuration from A to Z11 Extra Information
Tip
Tip

For the SmartgridOne Controller energy meters are installed 'in reverse' when they count export / production / discharging as a positive number, and import / consumption / charging as a negative number.

Warning
Warning

For stable functioning of the control system, it is important that the SmartgridOne Controller knows when an energy meter is installed in reverse.

You can indicate in the settings of the energy meter in the 'Devices tab' that an energy meter is installed in reverse.

Image 1
Image 1
Last updated September 7, 2026Edit this page

Rescale energy meter readings

Previous Page

Savings Estimates

Next Page