SmartgridOne logo
SmartgridOne logo
Accessories
AppCertificates
Configuration from A to Z
1. Link to your account2. Accessing commissioning interface3. Grid limits4. Location / address5. Add grid energy meter6. Add other devices7. Grouping devices
8 Local Control Modes
9. PV panel configuration10. External control signals
11 Extra Information
Adding a deviceAdmin password and two-factor authenticationAdvanced settingsBackupBattery maintenance chargeConfiguring a fixed IP address in WindowsData usageDC-Linking Inverters and BatteriesDevice settingsDirect relay or switch controlEmail alarmsEnergy CostsEnergy storage and EVsFactory resetMaster/slave invertersNetwork settingsPhase imbalance correctionPredictionsPrioritiesReboot and automatic rebootRescale energy meter readingsReverse energy meter readingsSavings EstimatesSettings page overviewSoftware updatesTesting and manual overrideUser management
Control response timeController
Customer Specific
Devices
External Signals
InstallationLicenseNetworkQuick StartSafety, maintenance and legal noticesSpecificationsStatus LEDs
Toolbox
Troubleshooting
Video tutorialsWiring & connectivity guidelines
Configuration from A to Z11 Extra Information

Data usage

Minimum data bundle

If your SmartgridOne Controller is connected to the Internet via a mobile network, you must provide at least 5GB of data usage per month, and if you connect more than 5 devices to the SmartgridOne Controller, you must additionally provide 1GB/device.

Warning
Warning

If you use external control signals (e.g. for curtailment, imbalance market connections, ... etc.), it is highly recommended to use a fixed Internet connection or an unlimited mobile data plan.

DISCLAIMER: The manufacturer of the SmartgridOne Controller cannot be held responsible for mobile data usage outside your bundle.

Data saver

You can enable the data saver in the "Settings" tab, in the section "Network usage": set "Data saver" to "On" and click "Save". The data saver is also asked during the initial setup wizard.

Note
Note

When enabling data saving, no live data is available in the app, and settings that are changed in the app are applied with a delay.

Last updated September 13, 2026Edit this page

Configuring a fixed IP address in Windows

Previous Page

DC-Linking Inverters and Batteries

Next Page

On this page

Data usageMinimum data bundleData saver